Jump to content



Photo

Noen som vet???


This topic has been archived. This means that you cannot reply to this topic.
6 replies to this topic

#1 Hard pull

Hard pull

    Offroader

  • Supermedlem
  • PipPipPip
  • 242 posts

Posted 29 November 2007 - 13:28

Noen som har peiling på hvordan jeg kan finne ut og jeg har en 7 1/4" eller 8" diff i framaksel uten å begynne å operere doctor.gif ??? Det gjelder Pajeroen.... bilhuset har ikke peiling!!!!! dry.gif
Kjør hardt kjør stiiil!!!!

#2 Paul Håkon

Paul Håkon

    Grand offroader

  • Supermedlem
  • PipPipPipPip
  • 869 posts

Posted 29 November 2007 - 14:36

Sender du meg reg nr på en pm, så kan jeg se om jeg finner ut av det?
-Offroaders Hordaland - Modalen kjørefelt-


87 Toyota Land Cruiser BJ75

#3 Gi Gass

Gi Gass

    Potet, kan brukes til det meste..

  • Medlem
  • PipPipPipPipPip
  • 1353 posts

Posted 29 November 2007 - 14:46

Vil annta at du har den minste, da du har ifs. Men stiller du dette spørsmålet på Mitsu-delen, får du garantert svar. biggrin.gif
"det var det eg sa, du skulle gitt mer gass.., no kan du se.."

"I UNDERSTAND THE JEEP THING, THATS WHY I DRIVE A TOYOTA"

#4 Paul Håkon

Paul Håkon

    Grand offroader

  • Supermedlem
  • PipPipPipPip
  • 869 posts

Posted 30 November 2007 - 09:48

Axle Data

Gen 1

2.6, 2.3TD, 2.5TD & 2.5TDI (some) :-
front axle = 25 spline, 29mm diameter, diff = 7.25" diameter (low pinion)
rear axle = 28 spline, 30.5mm diameter, diff = 8" diameter
3.0V6 :-
front axle = 28 spline, 29mm diameter, diff = 8" diameter (low pinion)
rear axle = 28 spline, 30.5mm diameter, diff = 9" diameter

Gen 2

3.0V6 :-
same as Gen 1 except for NH & NJ auto has 7.25" diameter front diff (high pinion) NH & NJ 5sp man has 8" diameter front diff (high pinion)
2.5TDI :-
same as NH & NJ auto
3.5V6 & 2.8TDI :-
front axle = 28 spline, 29mm diameter, diff = 8" diameter (high pinion)
rear axle = 31 spline, 33.5mm diameter, diff = 9.5" diameter

Gen 3

3.5V6, 2.8TDI, 3.2DID, 3.8V6
front axle = 28 spline, 29mm diameter, diff = 8" diameter (high pinion)
rear axle = 33 spline, 36mm diameter, diff = 9.5" diameter


Mer teknisk pajero info her: http://www.outerlimi...pic.php?t=23638

Edited by Paul Håkon, 30 November 2007 - 10:05.

-Offroaders Hordaland - Modalen kjørefelt-


87 Toyota Land Cruiser BJ75

#5 Paul Håkon

Paul Håkon

    Grand offroader

  • Supermedlem
  • PipPipPipPip
  • 869 posts

Posted 30 November 2007 - 10:10

Hvis det er en gen 1 med diesel ser det ut som du har en 7,25" framdiff
-Offroaders Hordaland - Modalen kjørefelt-


87 Toyota Land Cruiser BJ75

#6 mptybox

mptybox

    Offroad-wannabe

  • Medlem
  • PipPip
  • 90 posts

Posted 07 August 2013 - 18:32

Hva med framaksel L200 k74 4x4 2.5td ds? Noen som vet dim der?

#7 mptybox

mptybox

    Offroad-wannabe

  • Medlem
  • PipPip
  • 90 posts

Posted 07 August 2013 - 18:33

På gen 1 paj kan man bruke bakdiff fra Starion mef diffbrems!! =))