07.09.2005, 23:00
Har lest litt rundt nå og fant en som hadde nøyaktig samme problem som meg.
--------------------------------------------------------------------------------
sounds similar to a problem I had with mine when I first got it.......in my case it was down to one of the solenoids that control the vacuum operated free wheeling hub engage/disengage actuator on the front axle, having burnt out, which meant that in 2wd the hubs were "floating" between being locked and unlocked., and the sound you can here is that of the axle stub splines merrily grinding against the teeth of the hubs., so get it sorted pronto before you need new front axles and hubs.
Check previous posts regarding free wheeling hubs and flashing 4wd lights and vacuum solenoids etc...its pretty well covered and seems to be quite a common fault in pajeros.
Temporary fix is to leave it in 4wd......goodluck
Som jeg forstår det så kan jeg løse dette problemet ved å bytte til manuellt nav fordi jeg da bestemmer selv om jeg skal låse huben til akselen eller ikke.
--------------------------------------------------------------------------------
sounds similar to a problem I had with mine when I first got it.......in my case it was down to one of the solenoids that control the vacuum operated free wheeling hub engage/disengage actuator on the front axle, having burnt out, which meant that in 2wd the hubs were "floating" between being locked and unlocked., and the sound you can here is that of the axle stub splines merrily grinding against the teeth of the hubs., so get it sorted pronto before you need new front axles and hubs.
Check previous posts regarding free wheeling hubs and flashing 4wd lights and vacuum solenoids etc...its pretty well covered and seems to be quite a common fault in pajeros.
Temporary fix is to leave it in 4wd......goodluck
Som jeg forstår det så kan jeg løse dette problemet ved å bytte til manuellt nav fordi jeg da bestemmer selv om jeg skal låse huben til akselen eller ikke.