20.01.2005, 00:00
Hmm Surpluscenter hadde en fin en til over kommelig pris.
![[Bilde: p9-6688C.jpg]](http://www.surpluscenter.com/images/p9-6688C.jpg)
http://www.surpluscenter.com/item.asp?UID=...tname=hydraulic
2.5" x 8" x 1.5" DOUBLE ROD CYLINDER
Brand new double rod, steering type hydraulic cylinder. Both rod ends are drilled and tapped to accept a standard 3/4"-16 tie rod end. A pair of 1" thick steel mounting blocks are welded to cylinder body.
SPECIFICATIONS
Double acting, double rod
Bore x stroke 2.5" x 8"
PSI Max. 3,000
Rod Dia. 1.5"
Push/Pull force 9,410/9,410 lb.
Ports SAE 6
Retracted Length 22-1/2" (measured from end of rod to end of rod)
Shpg. 24 lb.
MOUNTINGS
Both Rod Ends Drilled and Tapped
Drilled 2-1/8" deep
Tapped 3/4"-16 x 1-5/8" deep
Wrench flats at rod ends
Cylinder Body Mount
Four bolt mount on 11.50" x 3.62" centers
Untapped mounting holes for 3/8" dia. socket head bolts
Å prisen... kun 200$
Spørs bare om det ikke vil bli bestilt her i fra.
abotte@frisurf.no
"Ingen ting er umulig, det umulige tar bare litt mere tid og koster mye mere penger"
http://www.surpluscenter.com/item.asp?UID=...tname=hydraulic
2.5" x 8" x 1.5" DOUBLE ROD CYLINDER
Brand new double rod, steering type hydraulic cylinder. Both rod ends are drilled and tapped to accept a standard 3/4"-16 tie rod end. A pair of 1" thick steel mounting blocks are welded to cylinder body.
SPECIFICATIONS
Double acting, double rod
Bore x stroke 2.5" x 8"
PSI Max. 3,000
Rod Dia. 1.5"
Push/Pull force 9,410/9,410 lb.
Ports SAE 6
Retracted Length 22-1/2" (measured from end of rod to end of rod)
Shpg. 24 lb.
MOUNTINGS
Both Rod Ends Drilled and Tapped
Drilled 2-1/8" deep
Tapped 3/4"-16 x 1-5/8" deep
Wrench flats at rod ends
Cylinder Body Mount
Four bolt mount on 11.50" x 3.62" centers
Untapped mounting holes for 3/8" dia. socket head bolts
Å prisen... kun 200$
Spørs bare om det ikke vil bli bestilt her i fra.
abotte@frisurf.no
"Ingen ting er umulig, det umulige tar bare litt mere tid og koster mye mere penger"