14.08.2005, 23:00
.5 TRIAL GROUP S "STANDARD" (SERIES VEHICLES)
3.5.1 General information
Change on the vehicle is forbidden unless specifically allowed and only the permitted changes are allowed. The vehicle must be in serial conditions, like EU regulations or main importer regulations. All accessories and all special equipment, which can be supplied with the vehicle purchase, is allowed if no restrictions are present. Older vehicles may be brought up to date, according to their type. Beyond this the following regulations apply:
3.5.2 Tires
Tires permitted are only tire sizes that follow these regulations: Width can be up to 300mm and static diameter up to 900mm. The tire track (profile area) must not go beyond the fender in vertical line. If this is not the case, this can be achieved in form of flared wings. The material must consist of plastic. With remoulded tires the tread depth may be maximally 18 mm. The use of competition tires like nops, “alligator”,” Super-cross”, chains, spikes or tires of other means are not allowed. The mounting of dual tires is not permitted. If there are doubts about the profile, the Eurotrial-committee must decide. The recutting of the tires-profile is not allowed.
3.5.3 Rim
Free of will maximum 18”. (diameter, wideness and insertion depth). Spare wheels and/or tires may be removed. Track widening/wheel spacers are allowed.
3.5.4 Brakes
Vehicles with drum brakes may be re-equipped at the front axle with disc brakes. The parking brake must be maintained in the original.
3.5.5 Steering unit
The steering stop screws are optional. power steering is optional
3.5.6 Exhaust system
The Exhaust opening from the side or from above must be behind the middle of the wheelbase. Exhaust pipes may not exceed laterally over the body. They may end to the side or to the rear maximally 100 mm before the outer outline of the vehicle. Noise limitation: The volume of the exhaust system may reach max. 98+2 dezibel (DMSB near field measuring method)
3.5.7 Differential lock
Free of will for both rear and front axle
3.5.8 Wheel suspension
3.5.8.1 Shock absorbers
Shock absorbers are optional, however the number of shock absorbers, the working principle, and the fastening spots must be kept. Gas pressure shock absorbers are to be regarded from the work principle as hydraulic shock absorbers. Adjustable shock absorbers may not be used.
3.5.8.2 Level control
A serial level control may be inserted while maintaining the original work version.
3.5.8.3 Springs
The use of springs is free of will considering the type of spring.
3.5.8.4 Spring pendants
Longer spring pendants are permitted.
3.5.9 Body / cab
3.5.9.1 Dimensions
The dimensions must correspond to the manufacturer data.
3.5.9.2 Bumpers
The bumpers and the bumper mounting plates may be removed. It may be exchanged by other nonserial bumpers, however the form is not allowed to be moulded or shapped to the vehicle.
The material must be rigid and firm. Material thickness is free of will: Cover plates (or similar material) between body and frame are forbidden.
3.5.9.3
Hardtop, tarpaulin with linkage, rear flap, rear seats, spare wheel, spare wheel handle, edgeways mouldings, mirrors, mirror handles, side- and backscreen, side turn signals, door handles and door upper sections may be removed (door lower part must be present).
Definition for half doors: There must be a cover available, which prevents feet or legs from falling out when the vehicle is tilted. This cover must have at least the height of the belt line of the vehicle. In addition the cover must have at least the height of the highest point of the unloaded seat. The cover can consist of e.g. sheet metal, wood, lattice, etc. The cover can be made to be opened.
3.5.9.4 Body attachments
Attachments of the body may be renewed by plastic parts with identical external dimensions. The outer form must correspond to the series.
3.5.9.5
The vehicle outline may not be changed with masking tape or other measures.
3.5.9.6
Windscreen and windscreen frame may not be folded down. If the car has a roll cage the windscreen may be removed. The windscreen frame must be kept. Windscreens should not have stronger damages for safety reasons.
3.5.9.7 Bodylift
Bodylift is permitted with a maximum height of 50mm. This must be rigid.
3.5.10 Lights
The choice of tail lights and head lights is free of will.
3.5.11 Engine
Only 4-cylinder engines can be changed to an other 4-cylinder engine (manufacturer is not restricted) Additional tuning is free of will, but no supplementary additions (Compressor, turbo, NOX-injection, etc). Radiator, battery etc. are not allowed to be removed or repositioned from the original position in the engine bay.
3.5.12 Fuel tank
Can be changed, and removed from original place, but must be securely fastened. It must be firmly joined in a sufficiently protected position and installed to the vehicle. It may not be in the passenger compartment. The fuel tank must be separated from the passenger compartment by a fireproof guard.
3.5.13 Battery
The battery must be securely fastened in its original place.
3.5.14 Radiator is free, but must be fixed in the engine bay.
3.5.15 Manual, automatical and transfer gearbox, axle ration is free. The drive system (permanent or disconnectible) may not be changed.
Tommy Olsen
3.5.1 General information
Change on the vehicle is forbidden unless specifically allowed and only the permitted changes are allowed. The vehicle must be in serial conditions, like EU regulations or main importer regulations. All accessories and all special equipment, which can be supplied with the vehicle purchase, is allowed if no restrictions are present. Older vehicles may be brought up to date, according to their type. Beyond this the following regulations apply:
3.5.2 Tires
Tires permitted are only tire sizes that follow these regulations: Width can be up to 300mm and static diameter up to 900mm. The tire track (profile area) must not go beyond the fender in vertical line. If this is not the case, this can be achieved in form of flared wings. The material must consist of plastic. With remoulded tires the tread depth may be maximally 18 mm. The use of competition tires like nops, “alligator”,” Super-cross”, chains, spikes or tires of other means are not allowed. The mounting of dual tires is not permitted. If there are doubts about the profile, the Eurotrial-committee must decide. The recutting of the tires-profile is not allowed.
3.5.3 Rim
Free of will maximum 18”. (diameter, wideness and insertion depth). Spare wheels and/or tires may be removed. Track widening/wheel spacers are allowed.
3.5.4 Brakes
Vehicles with drum brakes may be re-equipped at the front axle with disc brakes. The parking brake must be maintained in the original.
3.5.5 Steering unit
The steering stop screws are optional. power steering is optional
3.5.6 Exhaust system
The Exhaust opening from the side or from above must be behind the middle of the wheelbase. Exhaust pipes may not exceed laterally over the body. They may end to the side or to the rear maximally 100 mm before the outer outline of the vehicle. Noise limitation: The volume of the exhaust system may reach max. 98+2 dezibel (DMSB near field measuring method)
3.5.7 Differential lock
Free of will for both rear and front axle
3.5.8 Wheel suspension
3.5.8.1 Shock absorbers
Shock absorbers are optional, however the number of shock absorbers, the working principle, and the fastening spots must be kept. Gas pressure shock absorbers are to be regarded from the work principle as hydraulic shock absorbers. Adjustable shock absorbers may not be used.
3.5.8.2 Level control
A serial level control may be inserted while maintaining the original work version.
3.5.8.3 Springs
The use of springs is free of will considering the type of spring.
3.5.8.4 Spring pendants
Longer spring pendants are permitted.
3.5.9 Body / cab
3.5.9.1 Dimensions
The dimensions must correspond to the manufacturer data.
3.5.9.2 Bumpers
The bumpers and the bumper mounting plates may be removed. It may be exchanged by other nonserial bumpers, however the form is not allowed to be moulded or shapped to the vehicle.
The material must be rigid and firm. Material thickness is free of will: Cover plates (or similar material) between body and frame are forbidden.
3.5.9.3
Hardtop, tarpaulin with linkage, rear flap, rear seats, spare wheel, spare wheel handle, edgeways mouldings, mirrors, mirror handles, side- and backscreen, side turn signals, door handles and door upper sections may be removed (door lower part must be present).
Definition for half doors: There must be a cover available, which prevents feet or legs from falling out when the vehicle is tilted. This cover must have at least the height of the belt line of the vehicle. In addition the cover must have at least the height of the highest point of the unloaded seat. The cover can consist of e.g. sheet metal, wood, lattice, etc. The cover can be made to be opened.
3.5.9.4 Body attachments
Attachments of the body may be renewed by plastic parts with identical external dimensions. The outer form must correspond to the series.
3.5.9.5
The vehicle outline may not be changed with masking tape or other measures.
3.5.9.6
Windscreen and windscreen frame may not be folded down. If the car has a roll cage the windscreen may be removed. The windscreen frame must be kept. Windscreens should not have stronger damages for safety reasons.
3.5.9.7 Bodylift
Bodylift is permitted with a maximum height of 50mm. This must be rigid.
3.5.10 Lights
The choice of tail lights and head lights is free of will.
3.5.11 Engine
Only 4-cylinder engines can be changed to an other 4-cylinder engine (manufacturer is not restricted) Additional tuning is free of will, but no supplementary additions (Compressor, turbo, NOX-injection, etc). Radiator, battery etc. are not allowed to be removed or repositioned from the original position in the engine bay.
3.5.12 Fuel tank
Can be changed, and removed from original place, but must be securely fastened. It must be firmly joined in a sufficiently protected position and installed to the vehicle. It may not be in the passenger compartment. The fuel tank must be separated from the passenger compartment by a fireproof guard.
3.5.13 Battery
The battery must be securely fastened in its original place.
3.5.14 Radiator is free, but must be fixed in the engine bay.
3.5.15 Manual, automatical and transfer gearbox, axle ration is free. The drive system (permanent or disconnectible) may not be changed.
Tommy Olsen