02.12.2013, 16:47
Da var delene kommet etter 3(!!!) ukers venting..
Har satt på pluggledningene og fått start på den igjen.
Leste nå av med Torque, ingen motorlys lyser da bilen står uten skilt og jeg ikke har prøveskilter liggende akkuratt nå.
Noen som forstår seg på dette som jeg har lest av? Jeg kommer frem til at det er en defekt o2 sensor, men hvilken?
Skal skifte bensinfilter i kveld når småen hopper i seng.
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Mode $06 report generated by Torque for Android
================================================
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Vehicle VIN: 1GNEK13T11J126656
Vehicle Manufacturer: Chevrolet
Vehicle Calibration ID: 12202088
09357822
0936
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Unit and scaling information are not supplied with the data from the ECU for this type of vehicle. Consulting the manufacturers service book for this information is recommended.
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Test report:
------------------
TID:$05 <a>CID:$0a</a>
- Rich to Lean sensor switch time(calculated)
Max: 1 450
Test result value: 432
PASS
----
TID:$05 <a>CID:$4a</a>
- Rich to Lean sensor switch time(calculated)
Max: 1 450
Test result value: 39
PASS
----
TID:$06 <a>CID:$35</a>
- Lean to Rich sensor switch time(calculated)
Max: 65
Test result value: 37
PASS
----
TID:$06 <a>CID:$41</a>
- Lean to Rich sensor switch time(calculated)
Max: 148
Test result value: 45
PASS
----
TID:$06 <a>CID:$55</a>
- Lean to Rich sensor switch time(calculated)
Max: 82
Test result value: 51
PASS
----
TID:$06 <a>CID:$61</a>
- Lean to Rich sensor switch time(calculated)
Test incomplete or dependant test failed
--
TID:$0c <a>CID:$60</a>
- Misfire counts for last/current driving cycles(calculated)
Max: 33 080
Test result value: 32 768
PASS
----
TID:$0c <a>CID:$70</a>
- Misfire counts for last/current driving cycles(calculated)
Max: 33 050
Test result value: 32 768
PASS
----
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">End of report.
Har satt på pluggledningene og fått start på den igjen.
Leste nå av med Torque, ingen motorlys lyser da bilen står uten skilt og jeg ikke har prøveskilter liggende akkuratt nå.
Noen som forstår seg på dette som jeg har lest av? Jeg kommer frem til at det er en defekt o2 sensor, men hvilken?
Skal skifte bensinfilter i kveld når småen hopper i seng.
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Mode $06 report generated by Torque for Android
================================================
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Vehicle VIN: 1GNEK13T11J126656
Vehicle Manufacturer: Chevrolet
Vehicle Calibration ID: 12202088
09357822
0936
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Unit and scaling information are not supplied with the data from the ECU for this type of vehicle. Consulting the manufacturers service book for this information is recommended.
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">Test report:
------------------
TID:$05 <a>CID:$0a</a>
- Rich to Lean sensor switch time(calculated)
Max: 1 450
Test result value: 432
PASS
----
TID:$05 <a>CID:$4a</a>
- Rich to Lean sensor switch time(calculated)
Max: 1 450
Test result value: 39
PASS
----
TID:$06 <a>CID:$35</a>
- Lean to Rich sensor switch time(calculated)
Max: 65
Test result value: 37
PASS
----
TID:$06 <a>CID:$41</a>
- Lean to Rich sensor switch time(calculated)
Max: 148
Test result value: 45
PASS
----
TID:$06 <a>CID:$55</a>
- Lean to Rich sensor switch time(calculated)
Max: 82
Test result value: 51
PASS
----
TID:$06 <a>CID:$61</a>
- Lean to Rich sensor switch time(calculated)
Test incomplete or dependant test failed
--
TID:$0c <a>CID:$60</a>
- Misfire counts for last/current driving cycles(calculated)
Max: 33 080
Test result value: 32 768
PASS
----
TID:$0c <a>CID:$70</a>
- Misfire counts for last/current driving cycles(calculated)
Max: 33 050
Test result value: 32 768
PASS
----
<p style="color:rgb(0,0,0);font-family:Helvetica;font-size:medium;">End of report.

