tekniske Tegninger??

[Svenna25]

noen som har tekniske tegniger på F-250 90mod. for eks. frihjulsnav,fjørfester og slikt??? Kunne vært greit og hatt tilbudet her?

[Sam]

Tekniske tegninger?
Om det er en online manual med bilder og skjematikk for F serien du leter etter, finner du noe her:

www.balsa.no/bil/manuals/78-86
www.balsa.no/bil/manuals/87-96
www.balsa.no/bil/manuals/97-00


--
Bronco 408" 4R100 NP208 MASS-FLO TweecerRT

Smallblock460/AFR225/NOVI2000 på gang..
www.balsa.no/bil/calcs/gearcalc

[Svenna25]

ingen som har???

Hadde vært en kjempe hjelp for noen av oss som ikke har skrudd så mye Amerikansk ford før.

[Tom K]

ikke blanke hos meg....Safety Notice

Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles, as well as the personal safety of those performing repairs. This information outlines procedures for servicing and repairing vehicles using, safe, effective methods. The procedures contain many NOTES, CAUTIONS and WARNINGS which should be followed, along with standard procedures, to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

It is important to note that repair procedures and techniques, tools and parts for servicing motor vehicles, as well as the skill and experience of the individual performing the work, vary widely. It is not possible to anticipate all of the conceivable ways or conditions under which vehicles may be serviced, or to provide cautions as to all possible hazards that may result. Standard and accepted safety precautions and equipment should be used during cutting, grinding, chiseling, prying, or any other process that can cause material removal or projectiles.

Some procedures require the use of tools specially designed for a specific purpose. Before substituting another tool or procedure, you must be completely satisfied that neither your personal safety, nor the performance of the vehicle, will be endangered.

Although information in the data is based on industry sources and is complete as possible at the time of publication, the possibility exists that some vehicle manufacturers made later changes which could not be included here. While striving for total accuracy, the Publisher cannot assume responsibility for any errors, changes or omissions that may occur in the compilation of this data.

Part Numbers

Part numbers listed in this reference are not recommendations by the Publisher for any product brand name. They are references that can be used with interchange manuals and aftermarket supplier catalogs to locate each brand supplier's discrete part number.

Special Tools

Special tools are recommended by the vehicle manufacturer to perform their specific job. Use has been kept to a minimum, but, where absolutely necessary, they are referred to in the text by the part number of the tool manufacturer. These tools can be purchased, under the appropriate part number, from your local dealer or regional distributor, or an equivalent tool can be purchased locally from a tool supplier or parts outlet. Before substituting any tool for the one recommended, read the SAFETY NOTICE at the top of this page

[Svenna25]

de var blanke desverre-_- prøve igjen?