belte varsler

[offroad king]

To turn seat belt chime off

Not that I'm against wearing a seat belt but there are times when you don't want it on. And those times you're normaly stressing about being bogged up to the sills! The last thing you need is an annoying beeper so here's how to turn it off without cutting or unplugging anything. It may take a couple of attempts.
1. turn the key to the ON position, foot off the brake
2. cycle the odometer with the trip reset button until the ODO is displayed (not trip A or B )
3. turn the ignition to the LOCK (OFF) position
4. Get your seatbelt in your hand ready to put in
5. turn the key to the ON position. when the dash lights have come on, press and hold the trip reset button and count a slow 12 seconds.
6. while still holding the trip reset button, buckle the driver's side seatbelt.
7. the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.
8. the process should be completed when you unbuckle or turn the key off.

kan noen gode hoder få dette over på norsk, sånn at normale folk kan forstå det? [img]style_emoticons/<#EMO_DIR#>/tongue.gif[/img]

[Jeeps]

Gidder ikkje å oversette, men sikkert samme som dette http://www.offroad.no/forum/Setebelte-vars...20&start=20 [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

[marting]

<!--quoteo(post=1515043:date=21 Apr 2009, 23:32:name=Jeeps)-->QUOTE(Jeeps @ 21 Apr 2009, 23:32) <{POST_SNAPBACK}><!--quotec-->Gidder ikkje å oversette, men sikkert samme som dette http://www.offroad.no/forum/Setebelte-vars...20&start=20 [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]<!--QuoteEnd--><!--QuoteEEnd-->


1. turn the key to the ON position, foot off the brake
2. cycle the odometer with the trip reset button until the ODO is displayed (not trip A or B )
3. turn the ignition to the LOCK (OFF) position
4. Get your seatbelt in your hand ready to put in
5. turn the key to the ON position. when the dash lights have come on, press and hold the trip reset button and count a slow 12 seconds.
6. while still holding the trip reset button, buckle the driver's side seatbelt.
7. the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.
8. the process should be completed when you unbuckle or turn the key off.



1.Vri nøkkelen til ON. ikke ha foten på bremsen
2.bla gjennom tripptelleren til det står ODO i displayet
3.Vri nøkkelen til LOCK (av)
4.Hold tryggleikstroppen klar
5.Vri nøkkelen til ON, når instrumentlysa kommer på, trykk og hold nullstilleknappen i 12 lange sekunder
6.Mens du fortsatt holder knappen inne, sett inn belte på førerside.
7.Tripptelleren bør nå vise "b ON" eller "b OFF" bla med nullstilleknappen til OFF
8.Da skal det være i orden. Fullføres ved å løsne beltet eller slå helt av med nøkkelen.